Item 7A* * Here is the proposed Site Plan, with the proposed mockup wall being on the southwest corner of the property. * The decibel (dB) is a logarithmic unit that indicates the ratio of
a physical quantity (usually power or intensity) relative to a specified or implied reference level. * Mock-up Testing Dynamic Testing PROPOSED DUMPSTER SCREENING Fan Demonstration
Cannon Demonstration Southwest corner of the subject property Properties to the southwest of the subject property Properties to the northwest of the subject property Proposed S-P-1 Regulations
“I-1” light industrial uses as currently exist to include an outdoor laboratory for mock wall testing up to 40 feet in height; Impervious coverage increase from 85% (existing) to 95%
of lot area; Bufferyard as proposed on plan and planting chart; 8 chain link with opaque slats for screening of laboratory yard and trash enclosure (per example photograph) The following
variances are requested: Reduction in required interior landscape area from 1,500 SF to 514 SF with a reduction in the Canopy Trees from 2 to 1, Accent Trees from 5 to 2 and 23 shrubs
to 15; Variance to the noise regulations of the City Code from a maximum of 70 dBA daytime (7am to 9 pm) 65dBA nighttime/weekend to 95dBA. (This variance requires City Council approval
only.) Planning and Zoning Commission April 5, 2012; Recommend approval (5-0) as requested with the variances and subject to the site plan review summary dated April 5, 2012. Item 4C
Questions? SITE PLAN DECIBEL COMPARISON CHART * Architectural Testing, Inc. is requesting approval of a Zoning Change and Site Plan from “I-1” Industrial Zoning District to “S-P-1” Detailed
Site Plan District for building architectural testing on property located at 2865 Market Loop and described as Lot 4, Block C, Commerce Business Park Addition. The zoning change and
site plan request would maintain the existing base zoning of “I-1” Industrial District uses while allowing for the construction of an outdoor testing area (including a 40’ mockup wall
to test building materials for hurricane, air and water structural performance, the addition of a storage area and an 8’ chain link security fence with privacy slats around the storage
and testing area. The property is located at 2865 Market Loop * The current land use is Industrial * The currrent zoning is I-1 * Here is an aerial overview to demonstrate the character
of the surrounding properties. * And this is an aerial photograph of how the property looks today. As mention with the introductory slide – the outdoor testing is proposed on the west
side of the building – storage on the east side and an 8’ fence around the area * Here is a detailed view of the site plan showing some of the proposed alterations to the existing site
as well as the location of the mockup wall. * This is the proposed screening device. A chain link fence with slat inserts is an allowable screening device in I-1 districts not located
adjacent to residential property. * This is an architectural rendering of the proposed mockup wall giving you an idea of how the wall would look after construction. The site would
be graded and leveled out. A retaining wall would be constructed. The wall would ne 35’ feet above the existing grade (forty feet in total). The maximum height of a building or
structure in the I-1 district is 35’ * This is a slide provided by the applicant which outlines the type of testing that may be performed. Architectural testing provides independent
testing, product certification, quality assurance for building materials. The reason for the size of the wall is to allow testing of multiple building materials (glass, luevers, brick,
stuco) simultaneously. The following slides also provided by the applicant should be able to provide the council a better prospective of the operation. This * This is the motor that
will be used for the wind and water structural performance testing. It is a V-8 motor with 7’ propeller blades. It is equipped with a muffler system. Staff visited the operation and
sent City Council a short video of the motor operation. The applicant indicated at the PZ Commission that currently the motor is used about 15 – 20 minutes about every three months.
The duration may increase as work demand increases. I will attempt to play a short video. A variance to the noise regulation is being requested. Currently the maximum dba permitted
at the property line is 70 dba. The ambient daytime noise levels range from 64 to 78, * Also huricane performance testing will be conducted. This is the canon that shoot 2 by 4
* * * * * www.archtest.com Architectural Testing, Inc. www.archtest.com Architectural Testing, Inc. www.archtest.com Architectural Testing, Inc. www.archtest.com Architectural Testing,
Inc. www.archtest.com Architectural Testing, Inc. www.archtest.com Architectural Testing, Inc. www.archtest.com Architectural Testing, Inc. www.archtest.com Architectural Testing, Inc.
www.archtest.com Architectural Testing, Inc. www.archtest.com Architectural Testing, Inc. www.archtest.com Architectural Testing, Inc. www.archtest.com Architectural Testing, Inc. Zoning
Change and Site Plan Architectural Testing Item 7A Owner/ Applicant: Architectural Testing, Inc. Request: Approval of a Zoning Change and Site Plan from “I-1” Industrial Zoning
District to “S-P-1” Detailed Site Plan District for Architectural Testing on property located at 2865 Market Loop and described as Lot 4, Block C, Commerce Business Park Addition.
Location: 2865 Market Loop ZA11-066 AERIAL WIDE Tri Dal Excavation and Utilities D-Bats Berkeys Eklund's Inc Tech Trans AERIAL CLOSE Storage area & Dumpster Outdoor testing area DETAILED
SITE PLAN Proposed Concrete Proposed Concrete Proposed 40’ Wall PROPOSED DUMPSTER SCREENING RENDERING Mock-up Testing TYPICAL TEST METHODS ASTM E283 – Air Infiltration/Exfiltration
ASTM E331 – Resistance to Water Penetration – Static Method ASTM E330 – Uniform Load Testing – Wind Loads AAMA 501.1 - Resistance to Water Penetration – Dynamic Method AAMA 501.4 – Horizontal
Building Movement – Wind Induced/Seismic AAMA 501.5 – Thermal Cycling AAMA 501.7 - Vertical Building Movement – Live Load/Column Shortening Condensation Evaluation Building Maintenance
Equipment/Anchor Testing Mock-up Testing www.archtest.com Architectural Testing, Inc. www.archtest.com Architectural Testing, Inc. www.archtest.com Architectural Testing, Inc. www.archtest.com
Architectural Testing, Inc. www.archtest.com Architectural Testing, Inc. www.archtest.com Architectural Testing, Inc. www.archtest.com Architectural Testing, Inc. www.archtest.com Architectural
Testing, Inc. www.archtest.com Architectural Testing, Inc. www.archtest.com Architectural Testing, Inc. www.archtest.com Architectural Testing, Inc. www.archtest.com Architectural Testing,
Inc. * Architectural Testing, Inc. is requesting approval of a Zoning Change and Site Plan from “I-1” Industrial Zoning District to “S-P-1” Detailed Site Plan District for building architectural
testing on property located at 2865 Market Loop and described as Lot 4, Block C, Commerce Business Park Addition. The zoning change and site plan request would maintain the existing
base zoning of “I-1” Industrial District uses while allowing for the construction of an outdoor testing area (including a 40’ mockup wall to test building materials for hurricane, air
and water structural performance, the addition of a storage area and an 8’ chain link security fence with privacy slats around the storage and testing area. The property is located
at 2865 Market Loop * The current land use is Industrial * The currrent zoning is I-1 * Here is an aerial overview to demonstrate the character of the surrounding properties. * And this
is an aerial photograph of how the property looks today. As mention with the introductory slide – the outdoor testing is proposed on the west side of the building – storage on the east
side and an 8’ fence around the area * Here is a detailed view of the site plan showing some of the proposed alterations to the existing site as well as the location of the mockup wall.
* This is the proposed screening device. A chain link fence with slat inserts is an allowable screening device in I-1 districts not located adjacent to residential property. * This
is an architectural rendering of the proposed mockup wall giving you an idea of how the wall would look after construction. The site would be graded and leveled out. A retaining wall
would be constructed. The wall would ne 35’ feet above the existing grade (forty feet in total). The maximum height of a building or structure in the I-1 district is 35’ * This
is a slide provided by the applicant which outlines the type of testing that may be performed. Architectural testing provides independent testing, product certification, quality assurance
for building materials. The reason for the size of the wall is to allow testing of multiple building materials (glass, luevers, brick, stuco) simultaneously. The following slides also
provided by the applicant should be able to provide the council a better prospective of the operation. This * This is the motor that will be used for the wind and water structural
performance testing. It is a V-8 motor with 7’ propeller blades. It is equipped with a muffler system. Staff visited the operation and sent City Council a short video of the motor
operation. The applicant indicated at the PZ Commission that currently the motor is used about 15 – 20 minutes about every three months. The duration may increase as work demand increases.
I will attempt to play a short video. A variance to the noise regulation is being requested. Currently the maximum dba permitted at the property line is 70 dba. The ambient daytime
noise levels range from 64 to 78, * Also huricane performance testing will be conducted. This is the canon that shoot 2 by 4 * * * * * * * Here is the proposed Site Plan, with
the proposed mockup wall being on the southwest corner of the property. * The decibel (dB) is a logarithmic unit that indicates the ratio of a physical quantity (usually power or intensity)
relative to a specified or implied reference level. *