Appendix 'B'
APPENDIX ‘B’
SELECTED GRAPHIC CLARIFICATIONS
Section 16.A.6 – Signs may be attached to a continuous plane fascia provided the sign does not extend above or below the
projection of the fascia. Such signs are only allowed when attached to structural canopy supported to the ground by columns
constructed of similar masonry material as the primary structure.
Section 22.D – Window Sign
1. PERMITTED SIGN STRUCTURE: Window Sign (as defined in Section 1.A)
2. MODIFICATIONS TO GENERAL REGULATIONS:
a. MAXIMUM AREA: Window signs may not obscure more than ten percent (10%) of the window area
per each individual window not to exceed eight (8) square feet, measured and located within ten (10)
vertical feet from the at-grade exterior entrance to the building or the lease space. The total area
permitted for window signs shall not exceed twenty (20) square feet per façade. The area of the sign
shall be measured by the smallest box that could be drawn around the continuity of the sign.
b. ILLUMINATION: No illuminated window signs shall be allowed except for open/closed signs.
WINDOW AREA: 108 s.f. (9' x 12')
MAXIMUM ALLOWED WINDOW SIGN AREA:
1’-4”
8 s.f. per individual window / 20 s.f. per façade
6’
(10% of 108 s.f. = 10.8 s.f., max of 8 s.f.)
MEASURED WINDOW SIGN AREA SHOWN:
8 s.f. (1'-4” x 6')